bagdranger
Well-Known Member
hey guys getting a set of 31x10.5r15. question is what i need to do to fit stock 85 4wd or would a body lift be in order?
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
85 ranger and 31s
- Thread starter bagdranger
- Start date
A body lift may do it, but you may also need a little bit of suspension. Up to 2 inches is usually attainable without drop brackets and that would definitely be enough.
snavelyj
Active Member
i use to run 31's in my '95 ranger with the stock suspension with out any rubbing or doing any fender trimming, I dont know how relivent that is to an '85 though
tanbuddy
Well-Known Member
My 89 is fine with a 1 1/2 inch leveling. Just use stock wheels or close to stock backspacing
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
