6" coil swap question...

[rangerslim]

I already have a 4" trailmaster lift so would it be possible to install 6" coils without any problems? maybe except longer shocks? I didn't know if I had to get different brackets and what-not....thanx...

side note: I have factory radius arms.....

 

[mkpecor]

yes you can get 6'' coils, thats what i have on my truck, you cant do 8'' coils. longer shocks will be needed

 

[JFA_Spyderman]

Yo,
Are your factory arms dropped? or are they still in the stock location?

Shocks, brake lines, and a good alignment "should" be all you need to watch out for.

 

[mkpecor]

most 4'' and 6'' lift kits use the same brackety. trail master, tuff county, IIRC,super lift, but sky jacker you can use 8'' coils on a 6'' lift,

 

[rangerslim]

yes, I have all drop brackets on radius arms and I-beams......thanks.....

 

[mjonesjr]

most 4'' and 6'' lift kits use the same brackety. trail master, tuff county, IIRC,super lift, but sky jacker you can use 8'' coils on a 6'' lift,

even Skyjacker uses the same brackets for their 4" and 6" kit.

The ONLY way you can put the 8" coils on a 6" lift is if the truck is a 4.0 super cab. Any other TTB Ranger and they will not sag the coils enough to align the front end.

 

[mkpecor]

realy, i dident know that, thanks for the input mjones.