4.0 no spark no fuel.. ignition fuse blows.

[Rangermilitia]

i have been trying to figure out the wiring on this 4.0 swap... no luck. going by what someone posted in the tech area i hooked up a red/ltgreen from the 4.o harness and a red/ltgreen from the 2.9 driverside harness. but it keeps blowing the ignition fuse. i'm at a loss right now and need some serious help please! the chiltons manual and haynes manuals suck too

 

[bobbywalter]

what year sploder?


i just leave the sploder eec harness intact and power through the diode on the switch side...the color for that varies.


sounds like there is a short to ground

 

[Rangermilitia]

Its a 93. Have you done this swap? I also can't figure out how to connect my fuel pump to my power dist box. Everything came out of a running explorer

 

[Spowerback]

just leave the sploder eec harness intact/ wiring to alternator to baterry broke or similar blowing wire

 

[RumpRangerSTX]

the chiltons manual and haynes manuals suck too yes they do i am putin a 93 4.0 into my 87 and it is not as easy as the say it is or i m just a dumb ass

 

[Rangermilitia]

haha

This is driving me nuts..

 

[RumpRangerSTX]

do u have testlite ? use it

 

[Rangermilitia]

enlighten me

How would a test light help in this situation

 

[RumpRangerSTX]

throw the books out and start checkin wire and wire it up mybe i should stop tellin u what to do get my ass and fix mine own

 

[Rangermilitia]

thanks

That was the encouragement I needed! Just finished it up. Let me know if u need help... I learned a lot.

 

[RumpRangerSTX]

That was the encouragement I needed! Just finished it up. Let me know if u need help... I learned a lot.

if u only knew what u where gettin into

 

[riverviewcontracting]

if u only knew what u where gettin into

shut up rump yours is done just tuck the wires and wheel it