351 Cleveland Intakes

[HOT_ROD_CAR]

I have a 351 C with 2V heads (CJ cam) in a daily driver that is ran below 6000 rpm. The vehicle weighes 3179 lbs. It currently has a 4V Edelbrock intake and a 650 DP Holley bolted to the 2V heads. I have a 2V stock intake that I was thinking about installing with a 500 CFM carb, but I wanted to see what you guys thought. Edlebrock intake or the stock 2V intake? Give me your opions. Thank you.

 

[baddad457]

I would leave the Edelbrock intake on it but replace the DP carb with a vacuum secondary 600-650 Holley. The 2 bbl with a 500 Holley is a good combo too, but if you're looking for gas mileage, the 500 is marginally better than the 650 DP carb.