2002 edge front bumper conversion!!

[Josh40601]

Unbolt the stock bumper. Bolt edge bumper on. That's all I had to do.

Bumper is bent on my truck, so the corners don't fit perfect, but with a good bumper, you'll be fine

 

[trxusrngr]

Will the same apply with a 93-97 3rd gen? I would really like to do this swap to my 93 in a bad way!

 

[Josh40601]

Nope. Completely different frames and mounts. It's not too hard, but you will have to make brackets to mount the newer bumper on 3rd gens.

 

[mmterrill]

was the fog light valance aleady smooth or was it textured and u sanded it smooth? looks really good. now u just need an edge hood too.

 

[backroad101]

Unbolt the stock bumper. Bolt edge bumper on. That's all I had to do.

Good to know. I been keeping an eye out for bumpers/valances on craigslist/ebay. Do the round fog lights use the same 9006 bulbs (or connectors for that matter) as the oval-ish 99 fogs?

.