2000 Ford Ranger 4bt Swap

[shr3dd3r 09]

Here's my build I'm starting:

http://www.4btswaps.com/forum/showthread.php?92506-2000-Ford-Ranger-4bt&p=913970&posted=1#post913970

 

[RonD]

Very nice, should be a nice project for the winter months

 

[Curious Hound]

I'll be watching. I would like to do a 4bt swap some day if I ever find one reasonably priced.

 

[shr3dd3r 09]

Yeah the 4bts certainly aren't getting any cheaper.

 

[shr3dd3r 09]

Is there a clutch master cylinder upgrade for the rangers? My clutch has always released very near the floor and it has been that way ever since I got the truck 11 years ago. Seems like it only moves just enough fluid to disengage the clutch.

I heard someone mention that there is a higher volume master cylinder that is a direct swap... don't know if that is true but if it is it would be nice to go on and replace it while I have the motor out and before the 4bt goes in.

any ideas?

 

[fte]

Air in the system is the reason for your low pedal issue. The whole assembly has to be bench bled to get all of the air out.