- Joined
- Aug 18, 2007
- Messages
- 810
- Points
- 3,101
- City
- New Richmond, WI
- Vehicle Year
- 1997
- Transmission
- Automatic
OK so to Recap the begining I was driving my '89 BII home from work when the engine just flat out died and wouldn't restart, I originally assumed that it was the fuel pump, after digging into it I found there to be the correct PSI at the fuel rail so ruled out the pump. After trying to turn it over I got it to run with about half throttle and once you let it idle down it died not tonight I put in a new cap, rotor and plugs and now I can't get it to idle at all. The old plugs are saturated with fuel and were bad in the first place the old cap was worn out. Whats are my options next as I am getting frusterated as all hell. It is almost like the wires are on wrong but I double checked all the locations and their connections. HELP PLEASE. Thanks guys

