2.8 to 4.0 swap

[Enuf.Is.Anuf]

I have a 84 ford bronco 2 with a 2.8 carb motor.. The motor has had many problems.. I am quite fed up with it It now has a knock in it. I would like to drop it and put in a 4.0L ranger motor that a buddy of mine has wrecked and totaled the motor is unharmed.. Im quite sure that it will bolt up to the same bell housing on my bronco. Am I right? If so what all has to be done to do so.. I know it's some electrical work and wiring but I would like a ruff run down Thanks

 

[cammeddrz]

to sound trite: search,

this is one of those subjects that has been run into the ground so many times that the ones in the first level have already been crushed into "4.0 swap diamonds"

 

[alwaysFlOoReD]

If you go to the sister site "The Ranger Station"
http://www.therangerstation.com/forums/index.php
you can find the "tech library" at the top of the page. It will probably have what you're looking for.
Good luck,

Richard

 

[kunar]

this is one of those subjects that has been run into the ground so many times that the ones in the first level have already been crushed into "4.0 swap diamonds"

lol. "4.0 swap diamonds" i like it

 

[cammeddrz]

maybe i just coined a new phrase