1988 BII Build

[1986broncoiister]

okay i would defently want just the brackets when ever your ready

 

[88_Eddie]

well i get the D30 this weekend, saturday. so i should be tearing everything down within the next couple weeks. FYI, they're the rough country brackets. the driver side bracket is just a drop plate. it's been clearanced so as not to hit the front diff.

 

[1986broncoiister]

alright sounds good just pm me

 

[88_Eddie]

will do

 

[88_Eddie]

for sale thread:

http://www.therangerstation.com/forums/showthread.php?p=1233173#post1233173

 

[88_Eddie]

tear down has begun. brinker, the coils are out but i didnt have time to get to the post office before 5. i'll take them by tomorrow or monday

 

[brinker88]

good deal. thanks again.

 

[88_Eddie]

bye bye ttb

 

[88_Eddie]

got all the crap taken off the D30 yesterday evening. my back is killing me from moving it all around by myself. i need more local 4x4 buddies lol.

the gear oil looks like it was just changed, brakes are in great shape, same with the BJ's.

trying to find some coils so i can start getting everything installed. i may get some new lower coil spring mounts so i can turn the axle and get a better pinion angle since this is a LP axle.

too much research to do!!

 

[brinker88]

Looks good my friend. Good luck w/ everything.

 

[88_Eddie]

TTB is GONEEEEEEEEEEEE......only took about an hour total to get it out. just need to find my coils and i can start setting everything up.

 

[1986broncoiister]

sweet man are you going to use long arms

 

[88_Eddie]

sweet man are you going to use long arms

yep, gonna do a 3 link with a track bar. i found a stick of 2x2x.250 wall DOM for $87, so i'm gonna use that and then fab up a new tranny x-member. they'll be around 36" long give or take.

i just found some 4.5" teraflex xj coils on a local 4x4 site for $115 shipped. gonna try those out and see how they work for my height. i'm at about 3" of lift in the back, so i figure with my winch and bumper, i should be at about 3.5"-4" up front, depending on how worn the springs are.

 

[RangerBoy94]

Were are the pics man????

 

[88_Eddie]

go back a few pages when i had just ripped out the D28, that's what the b2 looks like lol.

did just get pics of the springs, they look nasty, but i dont care for $115. the cheapest i had found were $160 with shipping.