• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

1987 A4LD - Really confused with what ATF to use.


Eugene998

Member
Joined
May 24, 2025
Messages
14
City
Winnipeg
Vehicle Year
1987
Transmission
Automatic
Hey guys could use some of your wisdom and knowledge (Novice here).

IMG_4119.jpeg


To preface things, I bought an 87 with the A4LD about 2 months ago with 87k miles as my first project (Not road-worthy yet according to my province’s safety standards). I’ve changed all the fluids except for the transmission oil and have already done quite a few small and moderate repairs. So far it’s running really good. In the midst of all this I want to drain and refill the transmission oil but all the multi-vehicle ATFs and backwards compatibility business is getting really confusing.

What are you guys putting in your transmissions?

I know originally when this car was produced it was recommended for ford Dexron II before Mercon existed, and that the original recommended fluid isn’t being manufactured anymore today. As far as I’ve researched it seems that my options are valvoline Max life, Dexron VI/Mercon LV or Castrol Transmax dex/merc. My mind is telling me to find the most fluid specific ATF for the transmission but it seems that everything available covers many vehicles.

Wouldn’t an ATF that covers many vehicles be prone to cause problems for this older transmission, what am I missing here? Right now I’m just trying to narrow down what’s best for the transmission and to not cause any damage to it.

If some of y’all could provide some insight that I’m missing here that would be greatly appreciated.

Thanks!
 
Last edited:
I don't think you'll go wrong with Dex/Merc of any kind.
 
I’ve always happily dumped Dex/Merc into my A4LDs. When that came out, Ford said it was an acceptable replacement for the Dex II. Now Ford says you can use Mercon V in them but being that Mercon V is full synthetic and kind of expensive, I’m not inclined to use it in the older transmissions.

That all said, personally I’ve become a big proponent of doing a shift kit at the minimum and ideally also some valve body work on the A4LD along with keeping the bands tensioned properly every 25k. My 92 I did nearly everything possible that I could find to the valve body and got the bands mostly tensioned (rust was a problem). 1,000x improvement in performance. Heat kills these transmissions along with lack of proper maintenance. Poor shifting creates heat. Shift kits and valve body work reduce heat by reducing slippage.

Also, change your reverse servo gasket and O-rings (get square cut O-rings if you can). Throw a new filter in too.
 
Dex II, III/Mercon.

I usually use Valvoline ATF in the blue 4 quart jug because I can get it on sale at Menards for under $20 but there are probably better fluids to use. Motorcraft is probably the best choice but is the cost justifiable in a truck like that, is the question.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top