rocker arm

Has anyone done the 95+ rocker arm upgrade on a bone stock older 2.3? Im curious about piston to valve clearance, and if the 2.3l and 2.5l motors were the same rocker arm. I gotta tear it down soon to swap the lifters, so im contemplating this mod while im in there. Thanks for all help!

As the title says I’m in search of the rocker rail retaining clips and pins for my 93. I didn’t realize how hard it would be to find these parts so while I was dismantling my rails to replace the rockers I messed up the originals. Does anyone have a link as to where I can find/order them or any...

HELP! First I'd like to at least claim to have searched the entire world wide web to find the answer to my current problem. I replaced the head gaskets, lower air plenum gasket, push rods, rocker arms, valve cover gasket, header gaskets, and for break in threw some 0W-20 and a new oil filter...

So I'm a little confused about the proper procedure for tightening the rocker arm fulcrum bolts after I replaced my head gaskets. The Chilton manual says to just lube the push rod and rocker arm assemblies then tighten the fulcrum bolts to the proper torque specs but the Haynes manual says to...