manual

I recently put a new clutch in my manual 1991 Ranger xlt 2.9l. After bleeding the clutch, it won’t shift into ANY gear, while running. The Clutch is super soft, but I can see it engaging. It’s full on fluid. Please help this has ruined my day haha.

I can’t seem to find anyone making headers for the 1991 2.9l v6 engine. Anyone know anywhere to get them or anyone who could make me some? Thank yall. This is my first post on here.

I am hoping someone has some experience with this issue and can help. It has been a challenging issue. Several months ago I was having intermittent starting issues. After reading the forums here (and doing various test) I suspected the Ignition Switch. I changed that out and the truck started...

Hey gang. I've been on this forum for almost a year now. Went idle for a bit when the Ranger wasn't running or being worked on. But we're back baby!! 1994 XL RWD 5-speed 2.3L Better known as Grimace Quick recap of how I got here: -bought non-running off FBM; claims it "only" needs a...

Hello new to forum and owning a ranger first and foremost sorry if this question has already been asked but i have a 1991 ranger 2wd with the 2.3L eight plug engine and my transmission has shit the bed on the stickers its a F17a Ka on the sticker in my search for a replacement i have found in a...

I have a 1994 2.3 2wd ranger with a manual trans I just picked up a 302 I’m going to throw into it I’m thinking about using a m5r2 out of a F150 and was wondering what I can reuse and what I’ll need to buy

.... After having to abandon my 1997 2wd automatic 4cyl Ranger with 33K miles with a new motor half installed (had to move NOW..then) .... I have a gem of a 1988 4x4, 2.9L MT and it is a PROJECT. Many of my tools are in storage and I am really having to rack my memory on this beast. I have...

I have a 1992 Ford Ranger XLT 4.0 manual 4 x 4. When I first bought the truck, I noticed that it would throw a code for a moment and misfire and then go away as I did maintenance on it. It would just disappear however it did not after a month or so of owning the truck the misfire got worse and...

Hello once again, I'm back at it in this abusive relationship ship with my 02 3.0 manual. I recently pulled the trans to do the rear main and now the wont go into gear while running. I've bled the entire clutch system several times and yes I made sure to have it in neutral before I pulled the...

1990 Ranger XLT 4x4 2.9L Manual 5 speed Hello my fight post here and I am looking for some help. I recently bought a 90 ranger from BAT and about 1000 miles in the transmission seized up on the freeway and shredded itself. Seemed to stem from leaking fluid and maybe I was just sold a bunk...

This will be my documentation of how I TDI swap my ranger. Stay tuned. I will be posting most updates on my new member page, and saving this one to big updates.

Working on getting started for my V8 swap! I got an 8.8 rear end out of a '97 explorer last week. I also ordered a fuel injected crate motor from BluePrint Engines that's going to be delivered towards the end of January. Here's the link to the one I got...

I'm looking to do a full rebuild of my 2000 Mazda B4000s transmission, it's got the 4.0L, 4WD, M5ODR1 trans, the case is spotless, but the guts are trashed, I know the bell housings are different for different engines, but can I take the internals from another M5ODR1 of a different engine and...

Hello everyone, it is good to finally make my first post and series of inquiries regarding some ranger goals I have in mind, moving forward with a future project truck. I'll post an introduction later separately to keep this as short as possible. I am currently at a phase in my life where my...

Hi everyone My 2008 4.0 Manual transmission is having problem going into first and sometimes third When shifting into first from a stop I hear a thud - and this is the driveshaft moving slightly ( I watched my buddy put it in gear while I was underneath) sometimes this is of off and on and...

3- 2wd manual transmission $150 each E67a, e2ta, e67a 3-4wd manual transmission $150 each E37a, e57a, e67a 1- t case $150 Thank you

i figured out my last two threads, the reason the truck was making a noise and would stall when you push the clutch. the separator plate is sliding against the flywheel constantly. i used the original 2.9 spacer/separator plate. the starter fit through it so i assumed it was fine, does anyone...

Seems to have been gone through by a mechanic. Memphis, looks like, although the person writing the post doesn't seem to like that detail 👀...

Hello! I’m interested in lifting my 1989 ford ranger and I have no idea where to start in lifting the body. It’s 2W drive and a manual. XLT body. I’m looking for a 3-6inch body kit for it. What’s some good options for me?

I have a 94 ranger with a 2.3 4cyl engine and the A4ld trans . The trans is bad and I am ether gona get it rebuilt or swap in a used one or swap to a manual. I'm told a rebuild will cost me a couple thousand dollars and I will still have a not so good a4ld , and as far as swapping in a used...