• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

iac valve

  1. IAC Issues Code p1504

    2000 ranger 3.0. Throwing code P1504. I have replaced the IACV with 2 separate ones, with no luck. Truck starts up and dies immediately. I took off the IACV and it started and idled way high (obviously). Harness has 12v to it. Am I missing something on installing it? I install with the battery...
  2. Se7enth Sol

    Is the IAC valve pulse width modulated (PWM) or simply on and off? 1997 Ford Ranger 4.0L OHV

    Currently doing a custom ECU and wiring harness on my 1997 Ford Ranger 4.0L OHV engine. For wiring purposes I need to know if the idle air control valve is pulse width modulated (PWM) or simply a solenoid that's on or off as needed. I haven't really found much information online after searching...
  3. Alam0

    2.5L ('98-'01) High Idle

    I've been having high idle issues for a while now. When the engine is fully warmed it will idle around 1100-1200 RPM. When shifting gears the rpm's don't drop. They only drop (very slowly) after I come to a complete stop. The engine seems to run better with the IAC Valve unplugged, around 750...
  4. Engine racing at start-up, hot or cold

    Engine races to 3k on start-up; when cold drops to 1.2 after 5 sec, then to .7; when warm, drops to .7 after 5 sec. Breaks my heart. TPS has been replaced. One solution is replacing the gasket on the IAC valve with one whose holes are only 1/4" in diameter. This makes for a rough idle and the...

Sponsored Ad


Sponsored Ad

Back
Top