engine rebuild

So I neglected my valve clearances too long and threw a couple pushrods a while back. Luckily there wasn't piston damage, but I replaced the heads with new ones as a precaution. I'm currently reassembling the engine but I noticed the intake manifold and the heads don't seem to be lining up...

So I just spent a lot of time and money rebuilding my Rangers 4.0 ohv after it developed a knock type sound at 340k miles (180k of which were mine). It appears only on tip-in and light acceleration to the naked ear. Except on cold startup when it can sometimes be heard briefly at idle after the...

I have a problem with the old 2.9l v6 i just rebuilt for my 1989 ford ranger. after rebuild the oil pressure shoots down pretty much the same time the coolant temp starts to rise. i also noticed a slight smell of gas coming from the coolant? so far no leaks, no mix in coolant/oil. runs great...

As the title says I’m in search of the rocker rail retaining clips and pins for my 93. I didn’t realize how hard it would be to find these parts so while I was dismantling my rails to replace the rockers I messed up the originals. Does anyone have a link as to where I can find/order them or any...