spacers

how big of a spacer can the ford 7.5” rear end handle with a 31in tire? i would also like to know how much wider the dana 35 ttb front axle is than the 7.5” in stock forms. also someone mentioned once that the 8.8” is wider and evens this difference is this true? for now i want to even it by...

i have 5/16 spacers on the front axle of my 1990 ranger and it has somewhat of a bulldog stance, will putting 5/16 spacers on the rear axle make it to where the stance is evened out or do i need larger/smaller spacers on the rear (kind of seems like i do) it has a DANA 35 TTB front and a 7.5...

So...straight to the point, I've never ran spacers on any vehicle I own. I acquired a 2002 Ranger a while back and finally picked up some decent wheels for it. They're 2010-2012 Mustang GT Premium wheels. I'm wanting to put some spacers on it , but nothing overkill. Could anyone recommend what...

Hey. I want to lift my 2004 Ranger 2wd. I'd like to lift 3in. I'm thinking coil spacers in the front and blocks in the back. If I put 3in blocks in the rear what's the best size coil spacer to put in the front to get the truck level at a 3in lift overall? Thanks.

Well been doing a lot of research the past few days on leveling my 94 4x4. Read a lot of threads and not one has said the better way to go.... I have to buy new springs anyway since i have about 1.5 inches of sag on the drivers side and about an inch on the other. So should i just buy stock...

I searched and couldn't find the exact answer i was looking for. What are peoples general opinions of wheel spacers like this? Does anyone have any bad first hand experience with these? Abnormal tire wear, ball joints not lasting, ect. This exact set is for sale, used less than a year for $120.

Recently bought an 86 B2, and am starting to get it ready for winter. The tires on it now are pretty dry-cracked, but I have a nearly brand new set of General Grabber AT/2's (31/10.50/15's) on ranger wheels. I bolted them on but theres a little rubbing, and i'd really like to avoid cutting my...

I have a set of 17x9 Bullitt wheels for my 91' Ranger. No problem with the back, but the front doesn't fit. I guess it's hitting the grease cap or something, but the inside diameter is just to small. Was wondering what my options are to make it work? Spacers? Grinding the opening? Modifying the...

I know I'm going to need another front end alignment. I looked for the answer so I wouldn't make a jerk out of myself and just post. My question is; am I going to need to do anything else to my suspension? I figured lift coils would be the best route. Don't like the coil washer spacer idea...

hello all, im new here, Ive recently been searching all over the net for ranger info and you guys seem to be the best. a few months ago i picked up a 93 ranger splash 4x4 5 speed 4.0l. and i love it, i get good fuel economy and its fun to drive. its definitely a work in progress and i have...

So ive decided to save money and go with spacers. now im clueless as to how they install, cus i noticed a huge hole under my coil, so im not sure where they mount to. Can someone with IFS setup on a 2wd help me? i need pictures, so i can see what im doing. im only looking for about 1.5 to 2...

ok so here's my story. I'm trying to put on jeep rims with 33's and I got the rims with the smaller hub hole so I got 2" spacers for it. I put them on to make sure they fit and they do, then I took them off because I dont have a lift yet. then I put my stock tires back on and I left the spacers...

Hey guys, So like everyone on here I'm looking to lift my 2wd Ranger. I eventually want to build it into a prerunner but that won't be for a long time so for now I just want something that will lift about 2" and give a stronger ride than stock but not be bouncy. I want to try and avoid the...