To start with I have searched but have not found anyone having the same problem I am. Most people have had happy endings. However I am not :dunno:
My truck is a 2004 ford ranger 4x4 with a 3.0 automatic 135000 miles and has been well maintained
The truck has randomly thrown a p0304 and a...
I have the stock fx4 level II shocks on the front of my truck and have been running whatever 4 wheel parts sold me on the back. They are mx6 procomps. I want to run the factory bilstein level 2 shocks on the back of my truck but have raised it a additional 2 inches. I added spacers on the front...
Ive decided i want to put a camper top on my truck. I know very little about them, i just know i want one that the side windows slide, preferably the front window against the cab also. I want a brand that will not leak. If yal could post pictures and brands that would really help. I also want to...
Couple pictures of the truck, havent been on in a while. In the future is a tube rear bumper and to install my front locker that is sitting in my room :yahoo:
Ok so i picked up a aussie locker for my truck to go with the detroit trutrac in the rear. I have the factory dana 35 ifs set up in the front. I want to put a arb diff cover on the diff why i have it out. My question is, is there any reason it wont fit?
On the back of my truck i have this annoying squeak mostly when accelerating or going over bumps. I have narrowed it down to the leaf springs and the little white spacers on them. I spray it all down with spray grease or a spray lubricant and it goes away for a week or so, my question is has...
So i cleaned the ranger up inside and out today and decided to snap some photos before it gets all dirty again. Tell me what yal think, these new wheels make me feel like i got a new truck lol.
My parking break works good^^^^ :yahoo:
Those of yal that went for the factory look is this what yal used? Seams like its a good deal, its not arb but if i have to have modify does it matter lol? Doesnt seam like it would be to hard to make this work from what i have been reading on here. This will be for accidents only ( they happen)...
I have a Pinion Leak that i cant seam to get rid of on my rear axle that is a 28 spline 8.8, after the truck was re geared i replaced the pin seal with a junk one the kit came with. I have replaced it twice now with ford pin seals and it still leaks. I have checked the vent to make sure its not...
Ok i wanted to make a poll but im not sure how. Basically in the next 10000 miles my km2s are going to be done and will need to be replaced. I cant make up my mind if i should get another set of km2s or the kevlars, in my tire size the kevlars are 5 pounds a piece heavier which im thinking i...
It handled the weight ok and stoped very well with the trailer brakes but the 3.0 really struggled going up hills. I could only hold 55 mph on the hills. I know i know i was probaly over loaded a little bit but still the performace seamed a little weak. I attached a photo of the trailer i was...
I finally got the hood painted, and i wound up selling my tire gate. I didnt like not being able to leave my tailgate down. I also got some 2008 tail lights. Tell me what yal think. The only thing left i want to do is get some alcoa wheels or the 4x4 sport aluminum wheels and re mount my gas can...
Ok so its been a while since i posted on here but here are some new pictures of the truck now that ive got some time to play with it. The 4wd makes life so much easier lol. Tell me what yal think. And one of these days im going to get to painting the hood lol.
This is...
Ok so now that i know the front diff in my 04 ranger is a dana 35 what is the lowest gears i can get in it. I wanted 4.88s but am wondering if they will fit, if not will 4.56s fit?
This truck started off as a 04 1wd edge but things have changed a little bit :shok: Almost done just gota figure out the gears i want, replace a axle boot and get that front diff in! I have factory shift on the fly 4wd :headbang:, ive never had it before but i love it! Alot of wiring but well...
Ok so the question i have is can i go to 4:56s gears in my 04 ranger with out changing the carriers? I have 3:73s in the front ( from a donor vehicle) and 4:10s in the rear. If i do change the carriers can i use the same lock right i have now in the rear? I need to get them geared the same so i...
Does anyone on here have a 01 up 4x4 ranger regular cab, short bed with a 8.8 rear axle, automatic and a 3.0l preferably? If you do can you post the vin? Long story short im makin my truck 4wd and the donor drive shaft is to short and i may not have enough time to have one made so if i had a vin...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.