Recent content by ERA_Evil

I was thinking that being left overnight any debris may come out of the pick up and settle down, then when it starts goin again it starts picking it up again and clogging. Part of the problem was that the engine rebuild was done by a mechanic on my hometown some 200 miles away, and I am really...

Alright, so I put in the mechanical oil pressure gauge and monitored the truck for a couple days. After sitting overnight and turning it on, oil pressure is great, tops out at around 55-60psi and then settles back down to around 20, RPM's are around 1300. But then, the more the truck is used...

Will do, thanks for the heads up. Hopefully I can get the exhaust done by this weekend. Will try to get the audio/video as soon as possible and upload them. I don't feel like the motor is struggling at all, it seems to rev pretty normally, cannot notice any loss of power, although I do feel it...

I put in the 15W40 trying to chase down the rattle and checking if a thicker oil made any changes, it didn't. I am still "troubleshooting". Regarding taking it to the mechanic, I kind of want to leave that as one of the last options, since I did not have a good experience with the mechanic, it...

Sorry for the missing info, engine received new main and rod bearings. I will go ahead and be acquiring and installing a mechanical oil pressure gauge as soon as possible to monitor the oil pressure, should be around 55 to 60 for this engine correct? Regarding the flywheel I am unsure if it...

I have a 2006 Ford Ranger Crew Cab 2.3l Duratec The truck has developed a rattle/hum and its driving me nuts, both hearing it and trying to trace it down. Motor was rebuilt August 2018, it was eating up around 5l of oil a month, I thought it would've been a major problem but once the motor was...

I have been through all possible forums to try and find and answer as to what steering wheel hub can I put on my 2006 Ranger Crew Cab XL, before the usual replies of it being illegal due to the airbag, please note that my truck is not a US model, it is not available in the US nor was it ever...

Hello, I have a 2006 Ranger Crew Cab XL 2.3l Duratec, which is Mexican, and I am going to buy a new clutch. My truck comes stock with an Eaton-Fuller transmission, which I am aware was not available in the US market, my question is if I can buy a normal clutch from the US Ranger and will it fit...

I currently have a 2006 Ranger XL Crew Cab, it has a 2.3l DOHC Duratec engine mated to a Eaton Fuller FSO 2405 transmission, 5 speed. I am looking to change it, preferably to one that has a transfer case bolted to it, my question is what are the transmission options for this particular motor?

Questions: need info on 4x4 swap (Mexican crew cab model) hey guys, i have a mexican 2006 Ranger XL Crew Cab, 2.3l I4 my questions are as follows: Did these ever come out in 4x4? if not, i would like to convert it to 4x4, and i have read most of the posts saying its better to just sell and...

hey guys, new to the forum and Rangers, been soaking up knowledge here and finally decided to join. I own a 2006 Ranger XL Crew Cab, 2.3l I4 Duratec engine 2wd. I love modding and come here for help and knowledge, so thanks in advanced.