4 link SAS+lift

[cdawall]

3 link SAS+lift

its only a dana 30 I really don't want to hear how its not strong enough etc. its better than the dana 35 ifs I destroyed.

mock up height of the truck

this is with the leafs compressed+bilsteins

i need some better backspacing for the rims :/

 

[dangerranger83]

Looks good, I would go for a longarm setup. Your going to be happy with this swap, I am with mine.

 

[mhughes165]

what size tire u plannin on runnin on that redic amount of lift for 33's lol

 

[RangerSVT]

Ok, so I won't tell you its not strong enough, but I will tell you, you are mistaken to think and say that a 30 is stronger than the 35, other than that you have a nice truck there
SVT

 

[cdawall]

what size tire u plannin on runnin on that redic amount of lift for 33's lol

35s might take the stock block out so it looks ok with the 33s until I can afford 35s

Ok, so I won't tell you its not strong enough, but I will tell you, you are mistaken to think and say that a 30 is stronger than the 35, other than that you have a nice truck there
SVT

No the diff isn't stronger than the 35 however the straight axle is stronger than the ifs.

 

[dangerranger83]

Still sounds like an upgrade to me. If it was shafts/CV's you were breaking then this SAS may be the fix.

What type of coils you going to be running?

 

[cliffrat]

looks good .t would be to tall for around here .What coils and leafs are u using? I,m about to do the same

 

[cdawall]

jeep 3/4 leafs i can't remember the coils

 

[cdawall]

slight update....been a bit and everything is just about done

 

[cdawall]

 

[legoms013]

Any particular reason for sticking with the stock Dana 30 inverted y steering linkage?

 

[escort_gts]

Any particular reason for sticking with the stock Dana 30 inverted y steering linkage?

That is what I used and it worked good enough. If the jeep guys use them with upgraded tierods...

 

[Toreadorranger]

That is what I used and it worked good enough. If the jeep guys use them with upgraded tierods...

They polished a turd.....

 

[escort_gts]

they polished a turd.....

lol

 

[bobbywalter]

but, is a shiny turd a successful turd?

how does one gauge that?


its a rapid cause of infamous jeep d.w...

good enough for now, but tears up tires still and when the cash is there getting a hi steer knuckle is advisable bud