SAS 92 Ranger

[STX1992]

im doin a SAS with fullsize axles i have everything in already an its set up to run 38.5s to 40s but i got a deal on some 44s then i found a company called Custom Suspension.com they have lift springs all the wy up to 26'' for a ranger which set should i get

 

[dangerranger83]

Depends on what your going to be doing with your truck and what you want, its your choice.

 

[STX1992]

Depends on what your going to be doing with your truck and what you want, its your choice.

I will be drving it in town lol I live in a very small town an puttin it in the local truck show an of course turnin it loose in every hole I can find would the 14" be enough lift the truck has a 3" body lift too

 

[wahlstrom1]

Prerunner fenders, or cutouts and 10" or less lift would be sufficient to clear 40's, especially if you move the axle forward to clear while turning.

 

[jovibuilt]

im doin a SAS with fullsize axles i have everything in already an its set up to run 38.5s to 40s but i got a deal on some 44s then i found a company called Custom Suspension.com they have lift springs all the wy up to 26'' for a ranger which set should i get

I have a set of their 16" rear springs.They are more flexable than the 6" skyjacker ones.Make sure you get insurance if you have them shipped.Ups lost one of mine.

 

[STX1992]

I have a set of their 16" rear springs.They are more flexable than the 6" skyjacker ones.Make sure you get insurance if you have them shipped.Ups lost one of mine.

what size tire are U runnin? an what kinda height did U get with the springs?
thanks

 

[jovibuilt]

what size tire are U runnin? an what kinda height did U get with the springs?
thanks

Not finished the truck yet,so i don't know what size tire I will end up with.Shooting for 44's or 46's.And it is aleast 16" height.But they are soft as I said so I expect them to settle a little.