Let's see your Welders

[triumphrider-1]

My father has a Miller Syncrowave 350 that I use a bit (no photo of it though).

Eventually plan to get a 230V MIG, plasma cutter first though.

 

[bobbywalter]

lincoln hd 3500

ramsond plasma 50 amp

ramsond 180 amp stick/tig

130 amp alternator for stick.....or if its real thick 3 batteries.


the batteries work pretty good for stick.

 

[metalmacguyver]

Yes my welder is lifted.

Hobart Handler 187. It is rated for up to 5/16. 230V. You can hear the difference in how much power it has compared to a 120V welder.

 

[Will]

I have a Hobart Stickmate 235.

I can weld 1/2" plate with it so whenever I decide to armor my little Bobcat and go downtown to wage war on the zoning commitee, I'm all set.

 

[Maverick]

Lincoln WeldPak 125. My dad bought it in 1987, it was the smallest 220 welder at the time. I run .035 wire with a 75/25 argon/C02 mix. Lets me weld just about anything I want. I've personally used it to weld everything from body metal up 3/8" plate. Its a great little welder.

 

[98 ranger xlt]

Yes my welder is lifted.

Hobart Handler 187. It is rated for up to 5/16. 230V. You can hear the difference in how much power it has compared to a 120V welder.

Are those mud terrains or all terrains and what size

 

[CopyKat]

Moving things around my shop I was finally able to get my welding cart finished.

 

[Rinny650]

We have a Miller CST 280 8-pack we use in the shop and this bad boy. Miller Air Pack. It hasn't let me down yet.

 

[JFA_Spyderman]

I have a Hobart Stickmate 235.
I can weld 1/2" plate with it so whenever I decide to armor my little Bobcat and go downtown to wage war on the zoning commitee, I'm all set.

Yo,
Easy there Will, thats been done. I was there the day this happened.

http://en.wikipedia.org/wiki/Marvin_Heemeyer

 

[Sasquatch_Ryda]

Saw that one Destroyed in Seconds on Discovery Channel.

 

[pickuptrucker]

We have a Miller CST 280 8-pack we use in the shop and this bad boy. Miller Air Pack. It hasn't let me down yet.

that thing is amazing! well, big at least

home depot lincoln 175 weld pack, flux core wire. does 1/4 in one pass no problem, thats as big as i have had to do so far. of cousre, at school we got like 230 machines

 

[Rinny650]

I can weld down to 32 Gauge plate and up to 0000000 gauge

 

[Toreadorranger]

Lincoln 175HD. Picked it up very lighly used for $500 (minus the tank).

I have the same exact setup.

 

[BLOODBANE]

Here's mine.....

 

[NapalmMan67]

Old ass Sears Home-n-Shop stick- for up to 1/2". And a Century 80- .30 flux core wire for the thinner stuff.

Although I would really like to upgrade to a nice wire feed for heavier stuff, I'm not fond of using the stick unit.

.