dumping

[Brownie]

Hey guys im looking to lower my 93 ranger 4.0 stepside for as cheap as possible can anyone help me out? Also is it possible to put a cold air intake in it? Thanks a lot

 

[Beanmachine7000]

I already has a cold air intake...

 

[Brownie]

Really i was told it doesnt lol

 

[Crazythingsido2]

it all depends on how low you wanna go

 

[Beanmachine7000]

Well, they lied... Ford gave you a cold air intake from the factory (it's not all shiny with one of them crappy cone filters) but it is cold air (comes from in front of the radiator)... A K&N intake doesn't do anything except let in more dirt and make noises...

 

[Brownie]

i have 18's to put on it i wouls like to get it as low as possible as it is just my toy and only be out on nice days in the summer

 

[Brownie]

Thanks for the info you know what the cheapest way to lower it is and what seats will fit right into my single cab

 

[Hazmat Ranger]

Again - do you want a 3/4, a 4/6, a 5/7 or do you want to lay frame or rockers? It all depends on HOW FAR you want to go. A 3/4 will be the cheapest if you do it right - Beams up front and axle flip in rear - under $400 unless you can get the beams from a friend or something. Flip kit is super cheap - $50 or less.

 

[doorgunner]

Brownie-Hazmat's V-6 is running @ 92rpm Edit: Cold air Intake? A black-top road on a summer day down here gets about 168*F. "Cold Air Intake" kinda falls in the same category as-ahh-hmmm-"Sun-rise". Now, if they called it a "not quite as hot" air intake, I'd buy one--'cept i already got one,too.

 

[Hazmat Ranger]

Hazmat's V-6 is running @ 92rpm

Now I know you have nothing better to do than count those pistons moving for an entire minute - LOL

And that is called Forum Idle - if it ever speeds up watch out

 

[doorgunner]

It seemed like the logical thing to do at 3:30am. The good news is that i could stay focused for 1 minute. the bad news is--I noticed you didn't give Brownie any of my chop-shop tips for doing a 3/five drop for under $79.95 P.S. Brownie--don't even ask--go w/what Hazmat says