1984 jeep dana 44 with amc 20 solid axle

[blue88b2]

can somebody tell me the options for stock gears it the year 1983-84 for jeep wagoneer dana 44 with rear amc 20 solid axle. Or tell me where to go to find out. THanks!!! Found a set but don't know the gearing, how common are gears and carriers for these?

-Jason

 

[blue88b2]

answered my own question by looking in the tech library. next queston. If it has hubs, it shouldn't have the vacum disconnect right?

 

[Explorin94]

In theory right id it has hubs then it shouldn't have CAD. But just look anyway should be on the passenger side about 12-14 inches in on the back of the axle.

 

[Sasquatch_Ryda]

The waggy axles i've seen the withe CAD, the CAD is cast into the center section on the passenger side.

 

[4x4junkie]

The waggy axles i've seen the withe CAD, the CAD is cast into the center section on the passenger side.

+1

It has a very odd-shaped diff cover.

('85up Dodge Ram D44s have the CAD unit on the tube)

 

[blue88b2]

Welp it doesn't have the cad. i bought them too! $150 for both and leafs, and wheels and tires! what a steel. Now i'm on the search for gears. Thanks you guys!