85 b2 fuel float

[Lobudgetranger]

I have an 85 bronco 2. Was told there was two fuel pumps just dropped the tank and there is only a sending unit in the tank auto zone doesn't cary it. Wanting my fuel gauge to work

Sent from my iPhone using Tapatalk

 

[adsm08]

From what I have gathered that is a piece that has been out of production for many years.

 

[AndyB.]

Here you go: E5TZ-9275-D.

https://www.ebay.com/itm/182563738661

I should clarify, that is the sending unit for an '85 BII with a 2.8. It's possible your tank (and sending unit) is from an earlier BII.

 

[AndyB.]

This is the earlier sending unit:

https://www.ebay.com/itm/182579902653

 

[Die.Fledermaus]

Doesn't the '85 us a mechanical pump on engine feeding a carburetor? '86 was a dual pump FI setup.

 

[Kevin Evans]

Doesn't the '85 us a mechanical pump on engine feeding a carburetor? '86 was a dual pump FI setup.

Yep. All Cologne 2.8s use a pushrod mechanical pump.


I wonder if the sender unit could be fixed. The float itself can be soldered if it has holes and the sending unit is basically just an adjustable resistor.

 

[enginepaul]

Yes, 2.8 is a mechanical pump mounted on the engine.
The fuel gauge has always been a problem. I puled my sending unit, tested OK - checked lots of stuff and finally found it was a wire from the sender to the gauge - BUT the gauge was still off!
Good luck.

 

[drsvox]

Yep. All Cologne 2.8s use a pushrod mechanical pump.


I wonder if the sender unit could be fixed. The float itself can be soldered if it has holes and the sending unit is basically just an adjustable resistor.

I sent mine to a guy in New York. The fix was pricey, but he did fix it. I'll see if I can locate his information.

If it's just a float problem, you should be able to find something online. The rheostat on the other hand would be the biggest challenge.

 

[fangotango306]

i ordered mine for my 84 from rockauto.com
http://www.rockauto.com/en/catalog/...+v6,1106132,fuel+&+air,fuel+sending+unit,4436