body lift

[yugregnar]

I have read about turning my torsion bars to get 1-2 inches of front end lift. But my question is what do I do with the rearend to level the front lift out. I dont want a truck with the front end higher than the rear. Please help this newbie to ranger mods.

 

[Bennybooster]

This is not an extreme suspension mod! Go to another forum!

 

[Blitzp]

you could buy or make longer hangers for the leaf springs. thats what im in the middle of doing.

also nice help to a fellow ranger driver bennyboost. i know its not extreme but its a start.

 

[Hooligan2c]

you could buy or make longer hangers for the leaf springs..

This, you can buy rear lift shackles to level out the rear. There are many brands, I like Belltech, they are decent and can be found on summitracing.com. Dont forget to get an alignment after cranking your torsion bars. I did when I was new to this and ruined my front tires

 

[Blitzp]

i think cranking my torsion bars would stop my tyres getting ruined, keep wearing on the inside.

 

[Sasquatch_Ryda]

Would make it worse actually. As you crank the torsion bars up the tops of the tires go inwards.

 

[Bennybooster]

also nice help to a fellow ranger driver bennyboost. i know its not extreme but its a start.

There are specific sections in this forum to ask these kinds of questions, this is not the section. /story

Also search, this has been covered more times than I can count

 

[yugregnar]

Wow sorry I entered your world Bennybooster!!! I will go look for the correct thread and leave you alone here by yourself.

 

[Blitzp]

Would make it worse actually. As you crank the torsion bars up the tops of the tires go inwards.

always thought it would go the other way, the more you know, thanks.