Looking for a 1354 manual t case.

[eduardo95]

I am looking for a Borg Warner 1354 manual transfer case. If any one is selling one for a fair price let me know. Thanks.

 

[brinker88]

I got one I'll give you for free. That's the one with the front slip yoke, correct?

Shipping would kill you though

 

[Snoranger]

The one with the front slip yoke is a 13-50.

A 13-54 has a fixed flange (either u-joint or cv-joint style, depending on the year) and the slip joint is in the driveshaft.

 

[eduardo95]

Yes i think so. I will need it cause gathering parts for a Dana 30 SAS and I'm missing the transfer case. I'm planning on running the stock 4x4 front drive shaft.

 

[eduardo95]

Brinker, is the one you have is for a slip yoke or fixed flange?

 

[bttlscrs00x]

Yes i think so. I will need it cause gathering parts for a Dana 30 SAS and I'm missing the transfer case. I'm planning on running the stock 4x4 front drive shaft.

What are you trying to gain by swapping in a Dana 30? It's not a very strong axle..

 

[eduardo95]

Yes i know, unfortunately its what i can afford at the moment. It's also for me to learn about the SAS. Also my truck is only a 2.3 and im not planning on doing extreme rock crawling or stuff like that. I will eventually upgrade to a Dana 44 but thats not until i have better engine that can actually back it up on the trail. This is all for learning purposes for me and like i said i will only be doing mild trails to begin.

 

[adsm08]

What are you trying to gain by swapping in a Dana 30? It's not a very strong axle..

Its plenty strong when the engine doesn't have enough power to break anything.

 

[schaffer]

Id spend money elsewhere...flexy lift for the TTB,good tires,lockers...etc.



That was until I saw your truck was 2wd.

 

[eduardo95]

Yeah it is 2wd. I already have the tailhousing to make my 5speed able to adapt a transfer case. I might get a 1354 from another TRS member but i cant remember his username, same that is hooking me up with the tail housing and main shaft.

 

[bttlscrs00x]

Its plenty strong when the engine doesn't have enough power to break anything.

True. Just seems like a waste of time and money to me.. To do the same job twice, even if it is to learn how to do it. I'd rather just buy a D44 and/or spend money on getting a bigger motor or whatever the plan is.

 

[LIMA BEAN]

True. Just seems like a waste of time and money to me.. To do the same job twice, even if it is to learn how to do it. I'd rather just buy a D44 and/or spend money on getting a bigger motor or whatever the plan is.

^^ I have to agree with that. ^^