Need a picture of a 4R70W transmission

[dasfinc]

Outside of a Vehicle with its wiring harness still attached...

Figured out my wiring issue, but won't be able to see what in the hell I'm working on with it in the truck and can't envision it... I don't have any good quality pictures of my setup out of the truck sadly...

 

[dasfinc]

May have already found it...

Pass side, 2/3rds the way back it looks like

 

[shane96ranger]

Are you needing a pinout you mean?

 

[TimV]

May have already found it...

Pass side, 2/3rds the way back it looks like

Yes, that is a 4R70W transmission.

 

[dasfinc]

Are you needing a pinout you mean?

I have the pinouts... Next thing I need to do is dig out my EVTM....

 

[shane96ranger]

I have the pinouts... Next thing I need to do is dig out my EVTM....

Oh, OK. The pinout is different on the 93-97's than the 98-07 according to my source. I thought that might be what you were after.

 

[dasfinc]

Oh, OK. The pinout is different on the 93-97's than the 98-07 according to my source. I thought that might be what you were after.

I PM'ed you, sorry for the confusion, I know the differences for the pinouts of the Solenoid plug, but I don't know the differences for the actual 'jumper' harness between the Engine and Transmission harnesses.

http://www.idmsvcs.com/2vmod/tranny/diagrams/electrical/external/bulkhead/index.html

 

[shane96ranger]

The picture I have has a completely different connector for 98 and up. Let me know if you need the PDF.