Cranking my torsion bars

[Tractordriver53]

I'me new hear and i cranked my torsion bars slightly i went 4 compleat turns on the adjuster bolts. I was wondering how much Yall had cranked them without getting them alligned I dont mind a trip to the alignment shop I just dont want to ruin a set of tires. Thanks

 

[mp3deviant721]

I believe 2" is the max, you'll still have to align it if you want your tires to last. Keeps the angles on the axles down.

 

[powerranger262]

I cranked until the front and back were level. Never got an alignment, never had any tire wear problems or ball joint issues.

 

[Tractordriver53]

Thanks man ill plan to take it to the allignment shop
and does any one know how far off the bump stops shoild be on a stock fx4 Level 2 mine befor i cranked them they wer about a 1/2 inch away from the a arm

 

[Tractordriver53]

I cranked until the front and back were level. Never got an alignment, never had any tire wear problems or ball joint issues.

How many miles have You had them cranked and what size tire are u running?

 

[powerranger262]

Cranked for 30,000miles with 32x11.5 BFG AT on 15x8 wheels.

 

[Tractordriver53]

Cranked for 30,000miles with 32x11.5 BFG AT on 15x8 wheels.

Thanks man Good to know.