• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Lets see your bumpers


:icon_welder: made a bumper for my B2. Mounts are 5/16 plate using three 1/2in bolts per side. Is made of 1.5in x .120 wall DOM. The shackle mounts are 1in plate set 3in deep inside of 2x2 1/4 wall square tubing. With a 'lil Warn 8274 for retrieving myself:icon_rofl: And the marker lights came off the side of a Grey Hound bus:icon_rofl: Am gonna swap my headlights for round ones to match the markers:D

21646004006_large.jpg


21646004005_large.jpg


21646004007_large.jpg
 
Also built a back bumper:icon_welder: Has just a 'lil 9 ton shackle for pulling with:icon_rofl: Bumper is made of 5/16 thick 6x6, that I chopped into a big piece of angle. Used same material for the frame mounts. The shackle mount 1.5in thick plate that goes through the bumper and is bigger than the hole, so it could never be pulled through:icon_surprised: Also has cut outs on outer ends for my Hi-lift, so I don't drop the B2:icon_thumby:

32247580097_large.jpg


32247580098_large.jpg
 
Damn, I want a mix of tank killer bumper and prerunner bumper lol... Cept not too heavy.
 
heres mine


SDC12187.jpg



SDC12726.jpg


Nice bar, but I like your 1 piece front end conversion from fiberwerx better. Can't wait till my truck has what it need to earn that 1 piece front end...
 
i know most of you dont like this bumper, but i figured id show it from different angles, i think these pics show it better then the original, but thats imo, im the only one who needs to like it

bumper2.jpg

bumper3.jpg

bumper4.jpg

I think the bumper looks good, better then my no lower valance looks like crap metal bumper... Lol. Anyone in Massachusetts wanna fab me a bumper I can draw up plans really detailed, if not on paper name your software and I'll design it. I'm use to designing computer network layouts for companies. I'll make it look Pretty:)
 
hey ForOffRoadDriving on that second gen that yopu posted a pic of, if its yours were did you get those clearcorners, i havn't seen those before and i really like them
 
2fa4046d.jpg

fd879761.jpg



more recent of mine, fenders trimmed so no fender hangs down, shackles installed, and lights mounted where they will stay
 
"^ damn, thats a zombie assault vehicle bumper! or a dry spot to stand in case of a flood?"

Hahaha!!!! glad you like it. Im gonna put a few lights on it and start building the back one soon.

For off road I like your use of exhaust clamps to keep your shovel on your light bar...awesome!
 
Last edited:
huh i'll have to look again and see if i find them, thanks though
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top