timing belt replacement

Wow what a difference! I just changed the timing belt/tensioner/water pump on my 1999 ranger 2.5(no ac model)I used to feel a “slap” when pressing on the throttle/engaging a gear. I was thinking it was a throttle body/cable problem. Now it shifts smooth, idles smooth, engine is purring like a...

Hi friends, I have on ol beater 1987 ranger 2.3L with a million miles on it that I bought from a guy at work a few months back. The timing belt broke this morning on the way to work. I got it home and am working on it and I have a pretty good Clymer manual so I am trying to line up the crank...

89 2.3 Running rough and dying at idle I've done the intake side sensors/gaskets. I took down the mid pipe to see if the cat fell apart and clogged up the muffler. It did so I removed the exhaust from the mid pipe back and installed a new muffler and tail pipe. The motor still ran the same with...

I have a 97 B2300 and I'm changing the timing belt. I've changed a couple TB before but I've never had this problem. No matter what I do, it's half a tooth off somewhere. I have the Camshaft and Oil pump pulleys lined up (triangle to triangle, and diamond to diamond) and the crankshaft lined up...

OK, So I am new to this site. I recently changed the timing belt on my truck. Now it won't start. It rolls over but won't fire. I have triple checked my alinment markers and they all seem to be alined. Still getting spark and fuel pressure. Any insite would be great.

I just bought a 99 B2500 and I am putting some money into it with clutch issues. I want to wait a couple of months to put a timing belt on it. Wanting some input on when you guys change yours.

My belt broke off while at a stop sign and I took the plastic cover off but now I have no idea how to get the belt off the gears, do I need to take off the Pully gear on the front and remove more unnessery parts?:dunno:

Ok, I know that there are a lot of threads covering timing belts and crank shaft pulley removals, but while I was trying to do mine I couldn't find a good one that covered the whole thing. This was my first timing belt project and I got a lot of help from some cool people on this forum so I...