prerunner

My 4.0 1991 ranger has a pig tail unlike any replacement alternators at orielly. It is the style with two outer clips instead of the more round single clip connection. Do I need to just replace this pig tail?? I’m currently broken down I’m going to replace the alternator in the morning when...

Hey guys! I'm looking to turn my 1996 ranger into a DD prerunner that I can have fun in, like the style of, and bomb down some dirt or gravel roads in! (I live in Michigan so that's pretty much all we have.) I don't need long travel suspension yet so I'm planning on just getting a 4" lift for...

I thought I'd share my current build on a 1988 Ranger standard cab. Its a 2wd with the 2.9l v6 and a whole lot of miles. I bought it from family, (its now been owned by 3 generations of my family) with the hopes to let it live out the rest of its life in truck Valhalla, amongst the dunes, and in...

I bought a 1994 ranger with the 4.0 and a 5 speed 4x4 with a blown headgasket ended up being two headgaskets and two cracked heads replaced everything got it running yesterday and today I was letting it idle and it idled pretty rough around 500-700 rpms then eventually dies i haven't been able...

First off: Hopefully not another dream thread! 2005 Ford Ranger XLT 3.0 Automatic - Torsion Bar Extended Cab 210,000 Mechanical Experiance: Rebuilt 4 stroke dirtbike motors - Moderate to High on cars - Done just about everything but a motor swap. Tools and workspace - good to go! Side note...

Hi guys new to the forum thing. I have a 99 Ford Ranger which I want to turn into a prerunner i have a lot of things done so far. Feel free to give some tips if you have any.

I have a 1998 Ford Ranger with 31's on it already. I really want to put a mid travel kit like a fabtech 5.5 or camburg kit. I would like some advice which to go with or any other kits. Also in college so trying to save as much money as possible but my front end needs work so might as well...

Hello all! I have been building an 88 ranger prerunner for a few months now and am nearing the end. I have done nearly everything on it twice because I am never satisfied. I was originally just going to leave the factory front 4wd axle in it and run no drive shaft or transfer case but I have...

Hey everyone, Just registered on the forums, been look in at them for months though lol, figured I would finally register and see if I could some fellow ranger fanatics lol, I've done all the work to my truck myself, and still plan on doing alot more. Any questions you have just shoot them...

So I picked up this truck back in February of this year (2013). Nice little reliable truck for a high school/start of college kid. Basic as crap, 2.3L manual, 1991 2wd ranger with 128,xxx. Used as a maintenance farm truck. No rust problems, besides the inside of the bed. Only problems I knew...

Im rebuilding a 1994 mazda b2300 and i want to make it into a prerunner kinda style.:icon_hornsup: This is going to be my daily driver for a bit and i wanna dress it up. The front end is sagging, its beat up, its ugly, im trying to give it the tlc it needs. I can weld so i dont have any problem...

I have a stock 98 XLT 2WD ranger and i have decided that i want to convert it to a pre-runner. i just recently got a job at a fab shop and i was considering building new control arms for the front end. i have also thought about just buying something like a total chaos kit for it and not worrying...

What's up everyone. First actual post in TRS (aside from that inroduction page). Anyways, I've got a stock 05 ranger edge 2wd. As most of you know, the edge's came factory "lifted". But Im considering trying to fabricate my own long travel suspension system. I'm looking for ideas or people...

Hey Guys, I am going to start my new body on my 01 ranger and i have been looking at the 98-10 TT body set for the Ranger from Fiberwerx. Heres the Front Fenders: http://www.fiberwerx.com/html/ford/r...gallery10.html Heres the Bedsides(the 6" ones, the 10" ones have to big a bulge)...

I have a 2008 ranger built into a prerunner. Im planning(hopefully) to take my rangers stock engine(6cyl 3.0) and swap it with a 94/95 mustang 5.0L 302 engine. Im wondering if this is a good idea, or if anybody has any other suggestions? and what do u suggest i do with the rest of the...

Made of 3/16th frame horn design 1 3/4 .120 tubing consists of four bends, light hoop and a aluminum skid plate! for sale if anyone is interested pm me