Search results

Hey guys im in texas an its getting really hot out here. tomorrow I am taking a 5 hr trip on my 97 2.3, currently has a leak on the high pressure vapor line, from compressor to condenser. my truck has both low and high side service ports at a 90 degree bend right at the compressor. I have access...

Hey guys im on my way to possibly buy a bed. i purchased a bagged 2006 ranger but want to buy a different bed a guy is selling a 2003 bed. mine is a regular bed his is a step side would it bolt on?? i need help fast as i said im on my way to look at it. also if anyone knows what beds are...

Hey guys im at the junk yard only day i have to be here!!! I need a rear bumper for my 06 ranger but only found one of a 99 mazda wich i actually like its a litte more smooth not so square will it bolt on??????? again only day i have to take this bumper for $50 need help asap! thanks

Hey guys i have all stock exhaust, and two holes in my muffler so im pretty sure its all rusted inside i want to get a new one what is the best sound? its a 97 2.3 regular cab want to dump before the axle I'm lowered 5/6 so my parking brake cable is been rubbing and melting that's the reason to...

so i want my 97 to have this bumper from a 98 4x4 problem is i cannot find one at junk yards, my question is does any 98 bumper work with this valence? cause i can find the valance online and normal 98 bumpers at jy (not 4x4) would they work? i can probably find fog lights online and brackets thanks

So ever since I've had my ranger its had a dent on the left rear side of the bumper this caused my bed to deform a little now that its lowered 4/6 you can really see it I was thinking of using washers at the bolts to level it but im concerned with its integrity? If i can do it Id like to got to...

Hey guys i have a 97 and like this bumper what year model is it?? Is it a bolt on? Thanks hopefully i find one at a junk yard

Do rangers have a serviceable roll over valve? I went to get gas and filed it up then it started leaking right there not a huge leak but a good size it did not leak from the filler but somewhere lower im thinking a bad roll over valve? any other ideas? my filler neck hose is really old and i can...

I lowered my truck to a 5/6 drop with i beams and springs took it to a shop to get it aligned and it worked...for a few miles then the passenger wheel went back to negative camber the guy told me those bushings were for awd trucks and it wasn't tightening the eccentric enough so it rolled is...

I need help now! i will start doing my seal then thing is ive seen forum say to use a sleeve kit. well my seal leaks from the front of the flange! right in the center you can see it wet i imagine is still the seal am i correct?

Its pretty simple i had a 3/4 drop on my 97 regular cab, this is the way i did it so here it is I removed the bed to make it easier also had to paint my c notch Started by removing the hanger and getting them out of the way then started to grind the rivets flat then drilled the center out...

I guess i can start this although it will be a bit slow, i have made the 60/40 to 40/40 mod and i am going to put two 8" Rockford Fosgate subs in there. i made a mock up on cardboard here is what it looks like if you guys have done it or seen its how me! i need ideas or advice thanks. here is...

*****Will Update as i go and get more pics***** Hey guys this is my seat mod im going to build a center subwofer box here are the pics i got so far. I removed the arm rest, it has a small round tab. Pop it off then it has a torx bolt i believe its a T45 (I will edit to right size) and that's...

strongly think of getting off this site, since i bought my ranger I've always looked here for mods to lower it and what not, asked many questions because i wanted to do it right the first time turns out no one really helps here lol i wanted to post my pics of all the stuff i do like my 60/40...

hey guys i have a 97 rwd lowered on dream beams and flip kit just installed the c notch! so i ordered front shocks and front 2" drop springs also have a pair of 4 degree eccentrics. question is is it really a 4/6????? im planning on flipping the hanger is that really 2"?? i dont want a stock...

Hey guys i made a sub box behind the seat but it forces me to move the seats forward. i have a 97 regular cab, 60/40 im wondering if the passenger seat would bolt right up to the driver side? if it does id like to get another one have a decent size gap between them and build a box there any...

Hey guys i just installed a new cat, also have a scanner and at idle the long term fuel trim is at 12-14 and short is around 5 really high correct? as soon as i rev it the long term comes down to 2-4% and stays while running and as soon as i let go off the gas its back to 19% Lt......vacuum...

Hey guys i just installed a new cat, also have a scanner and at idle the long term fuel trim is at 12-14 and short is around 5 really high correct? as soon as i rev it the long term comes down to 2-4% and stays while running and as soon as i let go off the gas its back to 19% Lt......vacuum...

Hey guys im really tired of this armrests on the doors peeling, i searched but cant find a repair or replacement does anyone know how to repair? or where to buy new ones? thanks in advance. :annoyed:

Hey guys this is my ride what do you guys think?