Search results

Short shake down run Found some small bugs to workout, should have it solid for summer runs.. Sent from my iPhone using Tapatalk

Haven't posted in awhile, here's an updated pic of the bii. Walker Evans bead locks wrapped in 37" Maxxis creepy crawlers. 52" curved light bar. Updated the rock lights to led. Next is an interior roll cage, & front winch bumper.. Sent from my iPhone using Tapatalk

So it's been a while since I've posted, but a few things have changed. Still a work in progress but I'm getting there. Sent from my iPhone using Tapatalk

All loaded and ready to roll. Sent from my iPhone using Tapatalk

This coming Wednesday I leave for a five day trip with a large group of jeeps. So I thought I would add something to remind them that I can hang with them.. Should get some good chatter... First trip with the 4.0 in.. Looking forward to having some great times... Sent from my iPhone using...

So I got the 4.0 swap done thanks for a huge help hitchner2009.. Now I decided to move in to another project.. Here's my attempt of a rock light build.. Sent from my iPhone using Tapatalk

Put some new seats up front, came out of a 2014 class c motor home. Was able to mount the to the original tracks without too much hassle. Definitely a huge improvement on comfort and looks. Also pulled the 2.9 out and. Will be pulling the 4.0 out tomorrow.. Hoping by the end of the day I'll...

Anybody following the live stream? This is intense wheeling,crawling, racing event.. ultra4racing.com/live/ has the schedule and live stream of all the action. Pretty cool to see what it's all about.

Will I be able to use the original carriers with the lower gear sets, such as 4.88?

Started with some 2" 1/4 wall square tubing, and 1 3/4" 3/16 wall round tubing.. Put a slight bend to the tubing, placed it against the square tubing marked at cut straight. Cut the 2" square tubing at 45 degrees on both ends on the band saw. 49 1/2" worked best for distance between tires for...

Not completed but a good start. Started with some 6"x3" 1/4 wall tubing, and a wheel hub from a small trailer. Mocked it up with jack stands, took some 2"1/4" wall square tubing for the lower support Then some 2" 3/16 wall for uprights and supports Placed a 32" tire from the explorer which...

Getting ready to start the 4.0 conversion into the bronco, donor is a 94 explorer auto with auto transfer case, my question is can I use my manual transfer case that's behind my 2.9 liter auto with the new 4.0 liter auto.. Any advise would help, or will I have to find a manual transfer case out...

Night run: Have many more pics, still have to get them off cameras.. This area is in Greely Hill CA, had a great time, and I must say in a group of 14 vehicles I was the only one that wasn't a jeep. The little bronc impressed many..

I ended up picking up a 94 explorer as the donor for for my 88 broncoii project. I have been through the tech info a lot, there's is still a couple unanswered questions I have. My plans are to take the dash the engine and all wiring involved and swap over, but here's the question. The explorer...

So I am looking at a 94 explore as a donor vehicle for my 88 bronco ii swap. It is a complete running explorer in fair to good shape.. Is there any unforeseen problems that I may run into with that year? Im real close to pulling the trigger, what do you all think?

I have an 88 bronco ll with an a4ld auto, was wandering what temp is considered normal running condition, when is it hot, and then melt down temp... Thanks in advance for the help... Tried searching for specific temps but came up blank...

So it's been about 2 months of admiring everyone else's rig in here, I thought I would post a little bit about mine.. Purchased this b2 about 2 months ago with no transmission and taking the guys word for it that it ran for $800... This is how it looked after a quick wash.. After stacking the...

Long time browser first time poster. New owner to an 88 Bronco ii. have had the it for about a 2 months now. I have quite a few pics of the build and progress of the little thing. With your site and a few bucks it is really starting to shape up... This site is filled with info!!!