Search results

http://www.buildprojex.com kind of a social media site for sharing your builds. Check it out.

So i've put an e-fan on my ranger and wanted to wire it up correctly. I want to run the signal wire to the relay through the fuse box under the dash. Yesterday i bought some ford specific connectors, none of which slid into the fuse box. I'm trying to make use of an open spot in the box, but...

I just bought a 92 3.0 for a work truck. besides the usual problems when buying a used truck, the truck has been good for the most part. Then yesterday i was driving down the road and it just died and wouldn't start. I checked to see what was wrong after towing it, and it had no spark. So i...

Anyone know what u-joint i'd need to go from a ranger drveshaft to a 9 inch rear? I'm thinking spicer probably makes some kind of transition u-joint but i don't know which one. any help would be appreciated.

Haven't really taken any pictures of the build, but here's a couple pictures. -totally stock except for tint- -Here is with leveling kit and 31 inch tires on newer ranger wheeels.- -and these last 2 are how it sits now. I've got 5.5 extended beams with 5.5 inch lift coils. 6 inch glass...

Some Lady rear-ended me on friday, and pushed me into the car in front of me. Not much damage to the front of the truck, totalled the navigator that hit me and dented the back door on the van in front of me. The tail gate is pretty well smashed along with a few other things. I really am not...

Hey guys, haven't been on in a while but this has really got me stumped. My truck (94 2.3l 5sp) started bucking last week. It's almost predictable when it will do it, dosen't do it above about 4000 rpm and dosen't do it if i hold the throttle at one or two different positions. from idle to 3900...

So i got to work this morning and my truck started making a terrible racket. looked down, and I have NO oil pressure. ={ it still runs, but i think she's done for. gonna pull the motor sometime this week and see what kind of damage was done.:sad:

Well after a long battle i had it running great for about 2 weeks after replacing the old coils. just a couple days ago it started acting up. About 2-4 times a day(whenever it wants) it will just die. turn the key off bump the starter and it fires right back up. not sure what's causing it, but...

they are trying to outlaw small bore Off-road vehicles, please go to this site and sign the petition if you want you children and future generations to be able to enjoy motorsports! thanks! ------- www.tomself.com --------

it's like off-roading for kids :) http://www.youtube.com/watch?v=DV0rShQ2kG0

So i have a 94 2.3 2wd ext cab. I have a 2 in coild spacer lift up front with 31x10.5r15 tires. i got the inner fender well pulled back about an inch so it dosen't rub anymore, but my tires still rub on my sway bar. would it be terribly stupid to notch the bars, or does anyone else have a solution?

Just wanted to let everyone know that i installed the leveling spacers today. For anyone else using bolts instead of stud extenders, the stock bolt is 3/4-10 x 8 inches long. After being pretty unsucessful looking for an open hardware store on saturday, i found a 10 inch bolt. The...

any one know what size bolts i need to install 2" spacer in the front? thanks! :D

http://www.stopthrillcraft.org/ check out the video at the bottom of the page. kind of ridiculous.

So i decided to get these bosch plug out and go with some motocraft plugs in my little 2.3l. Let me just say ford is really proud of their $h1t! 88 dollars and change for 8 plugs. :shok:

i just tested resistance between corresponding terminals on my coil packs. on the dirvers side coil pack i got 15.3-15.8 and the passenger I got 16.1-16.5 the book says it should be 13-15k does that mean the coil packs are bad?

is there anyways to turn a dual plug DIS system into a 4plug system?

When lifting the truck just a couple inches, will I need to do anything to the driveshaft or will it be fine wit that minimal amount of lift?

on a rough country lift, are the 2wd and 4wd axle drop brackets the same?