Thank You for the info. I will be ordering both new switches to replace my cruise control on 2003 XLT 4x4. I was searching for a "How to" on how to do this and where to start. Any tips? Thanks Doug
2003 Ranger XLT Level II 4L 4x4 -
If I pull back on the stalk, low beams on, the low beams go out, high beams do not flash, all goes dark.
If I push the stalk forward, the high beams should come on and the low beams go out, but all goes dark no high or low beams
So all I have for night...
Hey Guys
I posted a couple days ago on the problems I am having (no headlights). After talking to a few guys they suggested i check the headlight switch.
Does anyone have a step by step on how to bench test this headlight switch with a volt / ohm meter?
Or a schematic of the headlight switch...
Hey Guys
I posted a couple days ago on the problems I am having. After talking to a few guys they suggested i check the headlight switch.
Does anyone have a step by step on how to bench test this headlight switch with a volt / ohm meter?
Or a schematic of the headlight switch plug?
My truck is a...
Only posting here because I have my dash torn apart - 1998 Ford Ranger 4x4. It started when I noticed that the push button switch for Fog Lamp, located to the right of the radio was on. I dont have fog lamps so i shut it off. That night I find that my headlights wont come on and neither will the...
Only posting here because I have my dash torn apart - 1998 Ford Ranger 4x4. It started when I noticed that the push button switch for Fog Lamp, located to the right of the radio was on. I dont have fog lamps so i shut it off. That night I find that my headlights wont come on and neither will the...
I bought a 95 Ford Range 4x4 knowing the 4wd didn't work. I am a back yard mechanic and I couldnt figure it out so I took it to be repaired. My mechanic put a new motor in the transfer case and replaced the stock locking hubs with a pair of Warn manual hubs.
The 4wd drive now works fine...
Hi
I am new to this site, was referred by a friend
and i have a question
I want to put bigger wheels and tires on my 89 ranger XLT
Currently it has 15" 235/75
My question - will I find 16" or 17" wheels to fit the bolt pattern of my 89' ranger?
Thanks
Doug
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.