I agree, however, the nightmare Im dealing with is WAY beyond that. Like, installing a Plastic Jaz Racing Fuel Cell under the bed and securing it with black duct tape wrapped 2X4s between the frame rails ? Or plumbing said fuel cell with copper ICE MAKER line ? Or how about WELDING the...
Im just insanely frustrated............................. Its killing me that I cant drive it. Not only cause its a blast to drive, but Im kinda under the gun to get it road worthy ASAP so I can put my daily driver 02 Expedition in the shop for some much needed repairs and preventative...
Measured on a flat surface with a straight edge, the 95 Mustang Water pump hub height is 3/4 of an inch shorter than the 98 Explorer 5.0 water pump hub height. This is confirmed by the specs sheet that was printed out by OReillys when I was looking for the proper pump.
Water pump pulley
"If the engine hasn't been apart and has Gt40 heads, it's either an Explorer/Mountaineer or a 93 Mustang Cobra, I'd bet on the Explorer." I would tend to agree, EXCEPT the harmonic balancer CLEARLY ISNT an Explorer Balancer. The Explorer harmonic balancer is VERY distinctive and a one piece...
Sigh, I hate to say it, but Im seriously considering throwing in the towel on my 95 Ranger Super Cab V8. I originally bought it 4 years ago as a non running basket case that already had the conversion done, but the guy couldnt get the butchered harness figured out and wanted to move on. I've...
Ok, so my baby is a 95 Ext Cab with a 302. I bought it from another guy that gave up on it, with the 302 conversion already done. I brought it back to life and have been working on it here and there as I've had extra money for the last couple years. The seller told me it was a Mustang 302...
Hey guys, been a member for YEARS now, but lots of life events over the last several years kept me off the board. Anyway, Im back to wrenching on my 94 1/2 Ranger Super cab 2whl drive with a 302 Conversion ( rescued a project someone else walked away from) Its got a rebuilt AOD upgraded to...
I know he stopped making the kits, but I have a local fabricator near me in Charlotte North Carolina that said he could do it but wants to see the CAD files
Saw in an old thread that you used to have a shop down the street from the guy that made the Cobra Front Brake Conversion Kit. Is there ANY chance you might know if he's still around or how to reach him ?
Hey guys,
I have an appointment coming up a week from Saturday to get the door and ignition lock cylinders changed out, the drivers side door cylinder has never worked and the ignition cylinder is so sloppy its not even funny.
Anyway, when the guy told me he had to pull the steering...
This was a NON running, blown trans project that someone else had given up on when I bought it for 1200 this April and immediately set about bringing it back to life after 6 plus years, a nasty divorce, an even nastier custody battle ( I WON) , a bad broken leg accident requiring 3 surgeries and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.