-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Swapping a good 2000 4.0 ohv engine into a 2002 sohc have complete donor truck any tips
- Thread starter Pullenj84
- Start date
- Joined
- Oct 24, 2012
- Messages
- 5,180
- Points
- 1,601
- Age
- 36
- City
- Lafayette
- State - Country
- TN - USA
- Other
- 1978 Honda XL350 12v & Electronic Ignition Swapped
- Vehicle Year
- 1988
- Vehicle
- Ford Ranger
- Drive
- 4WD
- Engine
- 4.0 V6
- Transmission
- Manual
- Total Lift
- 4"
- Tire Size
- 245-70-R16
You could end up with one bellhousing bolt not lined up. I wouldn't worry about it.
As for that swap, I'd leaver everything electrical from the 02. Swap the sensors (At least any that don't have the same connector.) from the old engine to the new. You might end up with codes, but it should run...
As for that swap, I'd leaver everything electrical from the 02. Swap the sensors (At least any that don't have the same connector.) from the old engine to the new. You might end up with codes, but it should run...
- Joined
- Nov 13, 2018
- Messages
- 5,053
- Points
- 601
- City
- Canaan
- State - Country
- NH - USA
- Vehicle Year
- 1993
- Vehicle
- Ford Ranger
- Drive
- 2WD
- Transmission
- Automatic
- Total Drop
- 3"
- Tire Size
- 235/55R16
- My credo
- If you don't have time to do it right will you have time to do it over?
If your state does emissions inspection with the Gordon Darby system NH uses it won't fly.
I’m in Indiana don’t think they care much lol
Sponsored Ad
Sponsored Ad
Special Events
TRS Events
Member & Vendor Upgrades
Become a Supporting Member:
Or a Supporting Vendor:
Recently Featured
TRS Latest Video
TRS Merchandise
Follow TRS On Instagram
