need a little information

[Marcos_Rngr]

hi, im in the process of lifting + air baggin my 95 Ranger 2wd, and 4.0 v6. i need to know if anyone has the dimension of the front suspension springs height under normal load (complete truck with engine installed) . forgot to measure if before dissasembling :-(
im building a fully custom airbag mounting plates and trying to keep the twin beam as original as possible.

 

[Blmpkn]

Perhaps this will help..

Thread 'Wanted: Coil Spring Measurements When Installed (Stock & Lifted)'

Feb 10, 2020

​

Hey everyone, this is a follow up to the discussion I started at:

https://www.therangerstation.com/fo...h-their-skyjacker-6-inch-coil-springs.183333/

My 1996 Ford Ranger 4x4 sits low in the front with my Skyjacker 6-inch Suspension. I want to do some research and gather some information, and I'm hoping you can help.

It doesn't matter if you're lifted or stock:

I want to know how tall your coil springs are installed in your truck. It doesn't matter if it's stock, lifted, or if you're using a coil spring...

• Jim Oaks
• Replies: 41
• Forum: General Discussions

• 

 

[Marcos_Rngr]

thanks for the link. actually it didnt help. jaja mine is 2wd, extendend cab.

 

[Blmpkn]

thanks for the link. actually it didnt help. jaja mine is 2wd, extendend cab.

There was a 2wd ext cab in that thread somewhere.. user showed 11" compressed height.