Full width daily driver

[bentwillowcustoms]

if you raised the track bar mount on the diff to match the steering the bumpsteer would be fine, i like your track bar mount,it looks stout enough to wheel.i wouldnt want to drop it anymore though.the 7degree bushings might help to regain a little castor,or building arm mounts a little longer.i got a similar set up on mine(EB diff not F/W).that is one of the better bolt ons yet in my opinion,for what thats worth lol.

 

[Live 2B OffRoad]

if you raised the track bar mount on the diff to match the steering the bumpsteer would be fine, i like your track bar mount,it looks stout enough to wheel.i wouldnt want to drop it anymore though.the 7degree bushings might help to regain a little castor,or building arm mounts a little longer.i got a similar set up on mine(EB diff not F/W).that is one of the better bolt ons yet in my opinion,for what thats worth lol.

Thanks man. im not sure what your trying to say but bolt on it was not it is now. i made it myslef. i had to make the trac bar bracket and radius arm brackets twice. first ones were junk i didnt even take it off the jack stands with the first set.

i wont make the radius arm brackets any longer. they should be higher up and my radius arms should be narrower on the axle. i wanted to move the arms but my <> wedges are cast with the C's so i cant. ill have to make brackets for the coils.
had i been able to move them in i would have and run the radius arms inboard of the frame. wich im going to do with the extended arms. buts thats a winter project.

gotta get a motor in it first.

 

[86ford]

just as an FYI, take a measurement of something everyone can relate to such as the rockers, front bumper, rear bumper, diff pig, center of the fender etc when people ask about height.

86

 

[Live 2B OffRoad]

if your refering to the radius arm mount height and getting a measurement then i really wasnt sure about what he ment as to make the radius arms longer or the drop the mounting location further from the frame. i assumed he ment the latter.

 

[Live 2B OffRoad]

can a moderator move this the rbvs under construction forum? please


as an update i bought a 4.0 to replace the destroyed 3.0 but i am going to bide my time for now. recently purchased a B2 for a DD and the 2.9 is ticking pretty bad. id really like a 5.0 in the ranger anyway.

im going to redesign the front suspension. ill be using radius arms still but instead of EB coils im going to use RaceRunner coilovers. i think. i need to do my rersearch on a good coilover. i know King is highdollar and comes highly recomended but i like the racerunner mascott lol

also this isnt my daily driver anymore and i dont think it will ever be again. i suppose if a moderator is so inclined he or she could remove that part of title