duraspark issue

[rlaag]

I hooked up duraspark II ignition on my 2.8 and it runs great. One concern tho is that my coil is geting really hot. I tried diffrent coils. I'm guessing its mayby a ground issue. Any feedback would be great.

 

[kimcrwbr1]

Are you using the stock square coil. If the ground was bad it probably wouldnt work very good if at all. You may need to add a ballast resistor if your using a after market coil to cut down the voltage going to it.

 

[dangerranger83]

Mine gets warm/hot sometimes too, but my last one went out due to being the original one. New one has a warrenty on it, so Im not to worried.

 

[The_Dealer]

My stock coil burnt up so I got a cannister summit brand with mount and ballast resister with mount for like 27 bux

 

[rlaag]

Cool thanks for the feedback

 

[kimcrwbr1]

keep us posted what you find out