dana 35 TTB bearing caps

[bigmark303]

I messed up and in a rush mixed up my bearing caps. I noticed the C on both the bearing cap and the housing. Does the C on the bearing cap face the C on the housing or are the Cs on the bearing caps suppose to match the same position as the Cs on the housing?

A picture of an opened Dana 35 TTB up close could also help if I can see the bearing caps installed.

Thanks for any help.

 

[scotts90ranger]

If I remember right I remember the letters you are talking about (mine were K I believe) and they were in different orientations on either side, so match the orientation of the letter with what's on the case.

 

[kunar]

If I remember right I remember the letters you are talking about (mine were K I believe) and they were in different orientations on either side, so match the orientation of the letter with what's on the case.

this right here. on the last one i had out they were marked with an X, the housing and the cap on one side were marked with a sideways x, the other side of the housing and that cap were marked with an upright x.

 

[bigmark303]

Thanks a lot guys. I figured it was just that simple. Happy holidays.