Wanted Airbox and or inlet ducting pre 92

[PlumCrazy]

Looking for the cold air inlet ducting that connects the airbox to the core support on an EFI 83-88 truck
(Not my pic, but an example of what I'm after)

Also potentially interested in a the whole airbox and ducting from any speed density (no MAF) Ranger.

There are basically two styles: The box with the inlet on the bottom and the box with the inlet on the side. I have the older style box with the bottom inlet, but I don't have the inlet ducting. I'm open to using the newer box with inlet on the side if it comes with the matching inlet ducting.

PS....don't toss parts you don't "think" you will ever use, because then you will need them. Hindsight is 50/50 or whatever they say.

Willing to wheel and deal if someone wanted to trade for a new 2.5" K&N and an aluminum relay cover/heat shield. Or Ill pay cash/paypal/etc (I can even send you a prepaid shipping label)

I'm in Millersport, OH, but I'll pay for shipping from wherever

 

[lil_Blue_Ford]

You know, I stripped two Bronco IIs for parts over the years and mostly stripped a Ranger and for whatever reason I don’t remember seeing any of that stuff in my collection of saved stuff… I’ll have to try and look around…

 

[85_Ranger4x4]

If you find the other style box I have the duct for it.

 

[PlumCrazy]

I was all excited I could get rid of something but it looks different than yours. Did they have different versions of them? It was from my dual snorkel carb intake project and it didn't do me any good, I could have sworn it was off a 2.9 truck, maybe it is for a 4.0?

Thats off an 89-92 truck from the looks of it. I'm interested in it if I can find an 89-92 airbox to match.

 

[PlumCrazy]

Thats off an 89-92 truck from the looks of it. I'm interested in it if I can find an 89-92 airbox to match.

Especially if the accordion part is still intact

 

[85_Ranger4x4]

Thats off an 89-92 truck from the looks of it. I'm interested in it if I can find an 89-92 airbox to match.

Yeah, I just reread your thing about the early vs late.

I was going by what it looked like at the time and didn't really note what it was out of. It had potential for my project but a carbed 4cyl tube was the ticket.