1996 Ranger clockspring/ cruise control question

[BobSacamano]

My 96 does not have cruise. But I noticed on the clockspring I have a 5 pin connector that has only 2 wires going to it, for the horn and ground. Can this clock Spring be used with a donor 1996 ranger/explorer ribbon connector for this 5 pin connector

and harness to set up cruise control?

 

[franklin2]

Here's your truck's cruise control schematic. The cruise requires 3 terminals on the clock spring, sharing one of them with the horn. The other two terminals on the clockspring are for the air bag.

 

[BobSacamano]

Thank you so much for replying. It looks like I have the wiring past the big brown connector, but from the connector to the clock spring, which is covered in yellow plastic, it looks like I just have the wiring for the horn. So my question is, can I get The wiring from an explorer and complete the connection to the clock Spring?