oil pan gasket

Hi everybody Can I anyone help me? Where can I place the jack to lift my 2000 2.5 engine for replace the oil pan gasket, its leaking a lot of oil because a mechanic put silicone instead of the gasket years ago Thanks

So i'm trying to get my oil pan gasket put on. This is the upper oil pan, cast aluminum. My truck is a 03' 4.0L SOHC. I ran into these two little tabs that stick down on the rear output shaft side of the gasket. Wondering what to do with these tabs. I'm getting very frustrated, because I wanted...

I need to change the oil pan gasket on my 3.0l and got as far as dropping the pan before realizing that it won't come all the way out. Can I just loosen the motor mount(if so how) or is it necessary to remove the engine/transmission as I have read on some sites. I repositioned the old gasket so...

I'm going to be throwing a new oil pan gasket on my 93 (along with a ton of other stuff). I was planning on going with this FelPro gasket According to this article Ford came out with an updated gasket and it requires longer bolts. Has anyone put on a new gasket? If so, does that FelPro look...