grinding noise

I’m hearing a grinding sound when I let off the gas in below third gear. I recently put about 500 miles on her, but only started hearing this in the last 10-15 miles. Any ideas? ‘93 4.0 V6 with the 5 speed and 189k on the dash

Hey, my 15yr old just bought this 93 Ranger (probably the 12th one in the family) and we will be replacing the clutch and clutch slave cylinder next week. We will flush the 5pd tranny, possibly swap out the rear main while we are in there. Differential was leaking, so we changed fluid and put...

About 1000 miles ago I replaced my cluthx, pressure plate, flywheel, rear main seal, and throw out bearing, I had an extra slave cylinder but mine was in better shape than the extra so I didn't replace, however when I went to bleed the clutch after it was put back together the small line going...

I drive a 1994 Ford Ranger Extended Cab, 4.0 OHV, auto tranny, auto 4x4, Dana35 front, Ranger 8.8/3.73 rear. The odometer reads about 202,000 but it has been running fast since 15,000 in 1996, I've owned this truck since November. I have recently replaced the Ball joints and repacked the wheel...

Hey guys, I got a 86 Bronco II, 4x4, manual, w/ the low range gearbox if that makes a difference. Runs and drives fairly smoothly, except that every time the rpms pass through like 2100 I hear a sort of grinding noise for a second, then it goes away. Sometimes I hear it a bit around 1500 also...