please help

85 2.8 V6 ranger pushrod wont seat i removed the valve cover to replace valve steam seals and found a pushrod (not bent) bouncing around and it wont seat it ran fine before except for the smokey exhaust

Hello all, I am about to buy a complete 4.0 with harness to drop in my 89 bronco 2. Does anyone know what would be the easiest swap pertaining to the wiring harness. I am defiantly getting a pre 1995. I was thinking 90’ ranger. Or would the 90’ explorer be easier or would it be the same harness...

Hi, currently doing a Duraspark conversion on my 1984 2.8l v6. Having one hell of a time finding a distributor. Looking specifically for the Cardone 302691, if there are any equivalent part numbers I should look for that works fine too. Or any auto yards with distributors from a 70s mustang or...

So I bought a 92 ranger 2.4 last year and it wouldn’t start I got it for cheap so I figured I could fix it. I was originally told it needed an ECM. I replaced the ecm. ($140) it was supposed to be pre programmed. Didn’t start so I started to do a checklist. Fuel pressure was a few pounds under...