• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

locking hub

  1. Spacers

    I want to put spacers on my ranger and I know I can do it on the back axle but the front with the manual locking hubs I wasn't sure about I don't know if there's a company out there that made them big enough to put over the hubs or not, just wanted some insight.

  2. Locking hub issue

    I have an 88 ranger that has manual locking hubs and have been having some issues. The passenger side hubs want to switch to locked every so often. They are the stock hubs. I unscrewed the cap and found that the screw through the middle can bo longer hold the cap on. After I unscrewed this I...
  3. sebastian323

    Front differential leaking, safe to drive in 2WD mode with front hubs unlocked?

    My front differential on my 1996 4.0 4x4 5spd manual ranger xlt is leaking heavily , probably from the pinion seal. Can I leave the front hubs unlocked and 4x4 off and drive around even if the fluid in the front diff is low/empty while I get around to fixing the leak? Also, does transfer case...

  4. 92 Ranger has noises coming from front left axle, or differential

    I have a 92 extended cab 4.0 4X4 5 speed manual hubs 142,000 miles. Truck started making a clicking sound from the front end . Based on some information I was given I bought a new pair of warn locking hubs. Didn’t make a difference. With the hubs locked and not in 4x4 there is clicking from the...

  5. Bronco Slides in Wet Weather

    Hi everyone. My first post here. I got this Bronco 2 XLT a few Months ago. Since I got it I had the brakes fixed, shocks replaced, fuel filter replaced, tires replaced, oil changed a few times, Marvel Mystery oil in the engine and gas tank. The problem i have with it now is the back wheels lock...

  6. I need to swap my auto hubs out.

    I need to know any ideas on what i shoud switch my auto hubs on my 94 ranger xlt 4x4 out with? I know warn makes a kit but i was wondering if there was any better ones to use. And also i want a just a 3 in lift but i was wondering if a suspension lift was much beter then a body or it doesnt...

  7. Front Locking Hub 4x4

    I'm in a 1991 ford ranger 4.0 v6, When i put my 4 wheel drive in and start going i hear a buzzing in the front drivers side hub, and it wont' lock in. but when i put it in reverse the 4 wheel will work. Then i go back to forward and i hear a big clunk and it still won't work and the buzzing goes...

Sponsored Ad


Sponsored Ad

Top