• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.


  1. chevy leaf swap bushings?

    Do the chevy 64 inch leaf springs use the stock ranger leaf spring bushings? I just purchased a set of polyurethane bushings for my stock springs, but then I learned about this swap and want to do it, but don't want to get rid of my new bushings
  2. Scobi64

    Arched Springs?

    Hi, new to the forum. Seen it many times. Anyways, I have a 1999 Ranger 4x4 and it's already got 5 inches of lift. I want to lift the rear another 1-2 inches. Not with any more blocks either. I was thinking if I put springs that had more of an arch to them. That would definitely do it. Where...
  3. chrwilkins30

    Leafs bushing?

    I got a new shackle for a 88 b2. It came with a new leaf spring bushing. Will it fit in the explorer spring im putting. I'm assuming it will but just want to make sure before i get started.
  4. will these leaf springs work?

    http://cgi.ebay.com/ebaymotors/6-83-97-Ford-Ranger-Rear-SoftRide-Leaf-Springs-_W0QQcmdZViewItemQQhashZitem35acbf9195QQitemZ230531502485QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_3145wt_1165 from my understanding all leaf springs are the same there for these should work on any year. my...
  5. kman

    explorer leafs on ranger

    so i want the leafs off an explorer since they r stronger but heard they lift it alittle if u use them i'm wanting to put a leveling kit on to make it sit level now but i was wondering if i can just put the explorer leafs and take out the stock lift block in the back if it would make the truck...
  6. Explorer Leaf spring questions

    I've got a 2000 2wd ranger and I wanna lift the rear up a bit without using blocks. I'm piecing together the fabtech 5.5 front so I'm going for around 4 in the back and I would like to use leaf springs from an explorer but I dunno if they'll fit right. I couldnt find a FOR SURE answer so my...

Sponsored Ad

Sponsored Ad