help engine

My 2.8 temp gauge won’t work New temp sender I tested the gauge it works

Hey guys, Been learning about rebuilding a 1971 351C for my ranger and when I was looking over the crank I saw it had a marking that looks like .010. I was trying to see if its i need undersized bearings for crank and rods, but theirs so much info on the internet about correct size. Seeing if...

It’s my sisters ranger and to be honest I am a novice to these terms. It is a 1998 ford ranger 3.0 auto, and at the moment it is sitting. Her husband is trying to fix it but to no avail. Here are I guess what they did and some lingering symptoms and thoughts. They replaced the radiator and the...

I have a 1995 XLT 4.0 RWD Ranger. The other day I was going too fast (~100 MPH) and had to slam on my breaks. After doing so my engine slowly started to die. I was looking in the engine bay and found an open nipple, along with a hose on my frame. After some looking, I found out it was for the...

85 2.8 V6 ranger pushrod wont seat i removed the valve cover to replace valve steam seals and found a pushrod (not bent) bouncing around and it wont seat it ran fine before except for the smokey exhaust

I put a 1999 engine in my 1994 for ranger its a 4L 2wd. I'm getting gas in the cylinders my ecm has power my icm has power. The truck has been sitting outside for a year or two. any ideas plz let me know thx.

Hello, I have a 1994 Ford Ranger, 4.0L OHV, Automatic, 4WD, Vin code X Truck recently overheated, Coolant problems (all gummed up) Barely runs, blows white smoke cloud, Milky Oil. Def, blown head gasket, or warped Manifold, worse case cracked block. Anyway, decided to replace Motor. I already...

hey all i am interested in adding boost to my vulcan and want to know what my best option is. im leaning towards a turbo charger over a super charger, also what parts i would need minus the obvious (turbo,header, ecm, tune) and what injectors would be best.. id like to be able to boost about...