• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

diagnose


  1. Bgunner

    Look for the next step/s in the diagnosis process.

    Lets start with the vehicle first shall we: 94, Ranger super cab, 3.0L, manual transmission, Stock suspension and drive train, Code 84: 7.5″ rear axle open with 3.45 gears, 146,xxx miles. No CEL Issues: Shaking while under heavy load, climbing hills, in first gear with RPM's between 1000...
  2. Electrical issues 1989 2WD 2.9L

    hey guys, i have a truck that is pretty rough the past few days and last night it just died driving down the road. Its a 1989 ranger 2.9L 2wd and its in pretty good shape. when i hook up the battery some lights flicker on/off and sounds like relays are clicking with the key out of the...
  3. OBD code p0303 misfire, need help

    Hello everyone, new to this forum. I searched a bit but couldn't find anything that addressed my issue directly. 1997 Ranger with 2.3, 2wd, 5 speed manual, everything is stock, no aftermarket pieces. Bought the truck and had an intermittent misfire code on cyl 2. Finally tore into the engine...
  4. At witts end

    I have done a recent top end rebuild on my 2.9L and cannot get it to start. I have replaced several sensors, the fuel pressure regulator and water pump. I cleaned the injectors and purged them with compressed air and a battery. I get good fuel spray from all cylinders in order with the plugs...


Top