• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Search results

  1. RangerRyan88

    Making B3000 corner light into turn signal?

    Hope this is in the right place, here's what I'm trying to do- I'm looking to build a front bumper for my Mazda, totally replacing the factory bumper. But I realized the only front turn signals I have are IN the bumper, and the corner lights are only running lights, UNlike the Ranger. I already...
  2. RangerRyan88

    At my wit's end with camber bushings please help me out..

    Ok here's the deal.. I've had my B3000 for several months now, a couple months ago I did a leveling kit in the front (I have a thread and vid about it) and I put in the adjustable camber bushings from NAPA. Now my PROBLEM is that the little bastards will not stay in despite my best efforts. I've...
  3. RangerRyan88

    Rear-End/Whole truck shimmy/shake

    Alright guys, I need some help I am really confused. First off, what I'm working with- 1996 Mazda B3000 Ext. cab 2WD 2" leveling spacers on the front. Haven't touched the rear-end. I parked my truck about 2 days ago, and everything was fine. No shakes, rattles, or shimmies. Today I get in my...
  4. RangerRyan88

    Some info on leveling a TIB and shocks

    So I just got done putting in my washer-spacer lift like what's in the tech library, with some of my own modifications from it and thought I would share some things I found out in the process. First off, the article suggests only going about 3/4" tall with the stack since that's as much as the...
  5. RangerRyan88

    Dreaming Pre-runner

    Hey all, just joined the site today from Southern Cali with a 96 B3000xcab 2WD! She's begging for long-travel but I got a lot of learning to do before that so I'll be rocking a bent-beam lift in the near future :icon_thumby: Ummm truck is stock besides an exhaust and some bigger tires.. I know...

Sponsored Ad


Sponsored Ad

Top